Cleaning And Maintenance - Mx Onda MX-AS2048 Manual De Instrucciones

6. After you have emptied, cleaned and dried the collection container, you can reinsert the filter
and the collection container. Proceed in the reverse order:
Reinsert the filter into the collection container.
Place the collection container on the motor unit again by inserting it first into the opening at
the bottom, and then close it. Keep pressing the unlocking device until the collection
container is locked in place.
Cleaning the vacuum cleaner
To clean the casing, switch the device off and disconnect the net adaptor from the socket.
Danger!
Do not expose the vacuum cleaner to extreme weather conditions (rain). Parts of the device must
not be cleaned in the dishwasher.
If necessary, you can clean the casing, dust compartment and filter compartments of the vacuum
cleaner, as well as the accessories with a damp cloth. Make sure the inside of the device does not
come in contact with any liquids. Do not use abrasive cleaning agents (scouring agents, diluting
agents) because they can damage the synthetic surface of the device. Connect the power plug of
the adaptor only then with the socket when you have made sure that all parts of the vacuum
cleaner and completely dry.
TECHNICAL SPECIFICATIONS
Adaptor rated voltage
Battery
Maximum power
Charge time
Battery duration
Solid dust container capacity
Liquid dust container capacity
Dimension
Weight
Specifications subject to change without notice.

Cleaning and Maintenance

230 - 240 V ~ 50 Hz / 15 V CC – 200 mA
12 V / 2.5 Ah
75 W
12 hours
8 to 10 minutes
0.3 liters
0.1 liters
395 x 102 x 122 mm (l, a, h)
1.6 Kg
7