Publicidad
Idiomas disponibles
Idiomas disponibles
EN
PRODUCT DESCRIPTION
1 Blender lid
2 Work bowl
3 Speed control
4 Pusher
5 Feed tube
6 Citrus cone
7 Juicer strainer
8 Blender filter
9 Spindle extension
10 Blade holder
11 Slicing blade (coarse)
12 French fries blade
24
1
2
3
9
10
21
11
12
13
14
15
16
17
56
13 Shredding blade (fine)
14 Shredding blade (coarse)
15 Slicing blade (fine)
16 Coffee grinder
17 Set of whisks
18 Grid cleaner of dicing blade set
19 Dicing blade set
20 Appliance body
21 Kneading blade
22 Chopping blade
23 Accessory storage box
24 Blender jar
4
5
20
7
6
22
18
19
OPERATING INSTRUCTIONS
Note: Do not exceed the maximum continuous operating time (KB max), see the table of technical parameters.
Whipping
1. Place the work bowl on the body of the appliance and secure it by turning it counter-
clockwise (the arrows shown on the work bowl and on the appliance body are
opposite each other when seated correctly).
2. Place the spindle extension on the coupling inside the work bowl.
3. Place the set of whisks on the spindle extension inside the work bowl.
4. Now put the ingredients in the bowl. Do not exceed the maximum permitted
amount of ingredients marked by the line on the work bowl.
5. Place the lid on the work bowl and secure it by turning it counter-clockwise (the
arrows shown on the lid and the handle of the work bowl are opposite each other
when seated correctly).
6. Insert the plug into the wall outlet.
7. Use the speed control to switch on the appliance at speed 1 or 2.
8. After whipping is completed, turn the speed control to the "0/OFF" position and
remove the plug from the wall outlet.
9. The bowl can now be removed.
Blender
1. Put the food in the blender jar.
23
a. To separate the seeds (e.g. from strawberries) from the mixed food, insert the
blender filter (8) into the jar and insert the food inside the filter.
2. Put the lid on the blender jar and secure it by turning it clockwise.
3. Put the stopper into the opening of the lid.
4. Place the blender jar on the appliance body and secure it by turning it counter-
clockwise.
5. Insert the plug into the wall outlet.
6. Use the speed control to switch on the appliance at speed 1 or 2 (depending on the
type of food being prepared).
8
7. Switch off the appliance by setting the speed control to the "0/OFF" position.
8. Disconnect the power cord from the socket.
9. The blender jar can now be removed.
TIPS
Add food only when the appliance is switched off. After removing the stopper from the lid, the food can be added
during blending.
RM3000
RM3000
EN
57
Publicidad
