Assembling Instructions - Osterizer BLSTBC4129 Manual De Instrucciones

ASSEMBLING INStRUCtIONS

ASSEMBLING THE JAR/CONTAINER
®
1. Your Osterizer
below:
2. Turn jar or container upside down so the small
opening is at the top.
3. Place sealing ring on jar opening.
2.
TIGHTENING THE JAR/CONTAINER
A
L
eft
S
top
C
blender comes with a glass jar and a stainless steel container as illustrated
1.
B
R
ight
S
top
J
aR
L
ug
M
otoR
B
aSe
D
4. Turn the blade to be used (ice crushing or
milkshake blade) upside down and place in
mouth of jar.
5. Thread jar bottom to jar /container.
3.
®
A. To tighten jar bottom, put assembled jar
securely into motor base ring with handle and
lug in front of the right stop.
B. Using jar handle, turn jar to the left as far as
possible. This insures that the jar bottom is
tightened properly.
C. To operate blender, if jar lug does not rest
against flat side of right stop, remove jar
assembly and place against flat side of left stop.
Seat jar firmly and operate.
D. To remove jar, lift straight up. (If it is not easily
removed, rock gently and lift up, do not twist). If
jar bottom cannot be loosened by hand, place
assembled jar into motor base ring with handle
in front of left side stop. Using handle, turn jar
to right until jar bottom loosens.
Do not attempt to place the jar on or
attempt to remove it from the motor base
while the motor is running.
E n g li s h - 5
4.