Descargar Imprimir esta página

Worx Nitro WG752 Serie Manual Del Usuario página 16

Cortacésped sin cables

Publicidad

Idiomas disponibles

Idiomas disponibles

8. TROUBLE SHOOTING
Problem
1. Mower
doesn't run when
operating bail is
activated.
16
2. Motor stops
while mowing.
Cordless Lawn Mower
Solution
A. Release operating bail
to turn mower off. Remove
batteries. Turn mower
over and check that blade
is free to turn. If not free,
contact customer service.
Blade should turn freely.
Also ensure the mower is
not sitting in tall grass that
may prevent the blade from
starting to spin. If so, move
the mower into an area where
it isn't under load to start.
B. Has battery been fully
charged? Plug in charger and
wait for green light to come
on.
C. For starting, press and
hold the safety lock-out
button, then pull back the
operating bail handle while
continuing to hold the safety
lock-out button. (See Fig. J1)
A. Release operating bail
to turn mower off. Remove
batteries. Turn mower over
and check that blade is
free to turn. If not free, call
customer service. Blade
should turn freely.
B. Raise cutting height of
wheels to highest position
and start mower.
C. Has battery been fully
charged? Plug in charger and
wait for green light to come
on.
D. Avoid overloading the
mower. Slow down the
cutting pace by pushing
mower slower or raise the cut
height. Or both.
A. Has battery been fully
charged? Plug in charger and
wait for green light to come
on.
B. Release operating bail to
3. Mower runs
turn mower off. Remove
but cutting
batteries.Turn mower
performance is
over and check: Blade for
unsatisfactory, or
sharpness - Keep blade
does not cut entire
sharp. Check deck and
lawn.
discharge chute for clogging.
C. Wheel height adjustment
may be set too low for grass
condition. Raise cutting
height.
A. Raise cutting height to
4. Mower is too
reduce deck drag on grass.
hard to push.
Check each wheel for free
rotation.
A. Release operating bail
to turn mower off. Remove
batteries. Turn mower on
side and check blade to
ensure it has not been bent
or damaged. If blade is
damaged, replace with a
replacement blade. If the
underside of the deck is
5. Mower is
damaged, call customer
abnormally noisy
service.
and vibrates.
B. If there is no visible
damage to the blade and the
mower still vibrates: Release
operating bail to turn mower
off, Remove batteries and
remove blade. Rotate blade
180 degrees and retighten. If
mower still vibrates, contact
customer service.
6. Battery charger
A. Check plug connection.
LED's not on.
B. Replace charger.
7. Battery charger
A. Battery needs to be
LED does not flip
diagnosed. Contact customer
to green.
service.
A. Chute clogged. Release
operating bail to turn mower
off. Remove batteries. Clear
8. Mower not
chute of grass clippings.
picking up
B. Too much cut grass is
clippings with the
clogging the airflow. Raise
Grass Collection
cutting height of wheels to
Bag.
shorten length of the cut.
C. Bag full. Empty bag more
often.
EN

Publicidad

loading