RS Pro RS-12 Manual De Instrucciones página 9

Digital Multimeter/English
1. Disconnect the test leads from the meter and any item under test.
2. Open the fuse/battery door by loosening the screw on the door using
a Phillips head screwdriver.
3. Remove the old fuse from its holder by gently pulling it out.
4. Install the new fuse into the holder.
5. Always use the correct fuse of the proper size and rating:
200mA range:Ceramic 0.2A/250V fast blow 5mm x 20mm
10A range: Ceramic 10A/250V fast blow 5mm x 20mm
6. Put the fuse door back in place. Insert and securely tighten the
screws.
MAINTENANCE & CLEANING
1. Repairs or servicing not covered in this manual should only be
performed by qualified personnel.
2. Periodically wipe the case with a dry cloth. Do not use abrasives or
solvents on this instrument.
Limited Warranty
This meter is warranted to the original purchaser against defects in material and
workmanship for 1 years from the date of purchase. During this warranty period,
RS Components will, at its option, replace or repair the defective unit, subject to
verification of the defect or malfunction. This warranty does not cover fuses,
disposable batteries, or damage from abuse, neglect, accident, unauthorized
repair, alteration, contamination, or abnormal conditions of operation or handling.
Any implied warranties arising out of the sale of this product, including but not
limited to implied warranties of merchantability and fitness for a particular purpose,
are limited to the above. RS Components shall not be liable for loss of use of the
instrument or other incidental or consequential damages, expenses, or economic
loss, or for any claim or claims for such damage, expense or economic loss. Some
states or countries laws vary, so the above limitations or exclusions may not
applyto you. For full terms and conditions, refer to the RS website.
14
15/10/2015 Version No. 001
Manuel d'instructions
RS-12
No d'inventaire: 123-1939
MULTIMÈTRE NUMÉRIQUE
FR
HOLD
V
DC
20
2000
m
200
m
2000
k
200k
10A
OFF
600 600 V
AC
200
200
2000
20m
A
DC
200
m
10A
1.5V
20k
9V
BATT.
2000
200
CAT III 600V
V mA
COM