Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING AND MAINTENANCE INSTRUCTION MANUAL
• READ, STUDY, AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS PRIOR TO USE.
• DO NOT OVERLOAD THIS JACK BEYOND THE RATED CAPACITY.
• THIS JACK IS DESIGNED FOR USE ONLY ON HARD LEVEL SURFACES CAPABLE OF SUSTAINING THE LOAD. USE ON OTHER
THAN HARD LEVEL SURFACES CAN RESULT IN JACK INSTABILITY AND POSSIBLE LOSS OF LOAD.
• DO NOT GET UNDER OR ALLOW ANYONE UNDER THE VEHICLE UNTIL JACK IS LOCKED IN PLACE.
• DO NOT MOVE OR DOLLY THE VEHICLE WHILE ON THE JACK.
• LIFT ONLY ON AREAS OF THE VEHICLE AS SPECIFIED BY THE VEHICLE MANUFACTURER.
• PLACE LOAD IN THE CENTER OF THE SADDLE ONLY.
• NO ALTERATIONS TO THE JACK SHALL BE MADE.
• KEEP CHILDREN AWAY FROM WORKING AREA.
• FAILURE TO HEED THESE WARNINGS MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.
• IT IS RECOMMENDED THAT A MATCHED PAIR BE USED TO SUPPORT ONE END OF A VEHICLE ONLY.
• PRODUCT IS NOT TO BE USED TO SIMULTANEOUSLY SUPPORT BOTH ENDS OR ONE SIDE OF A VEHICLE.
P R N D 1 2
P R N D 1 2
It is the owner and/or operators responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction
manual prior to operation of this unit. The owner/operator shall retain product instructions for future reference.
It is also the owner and/or operator's responsibility to periodically inspect and maintain the product to ensure they are in good working order.
The owner and/or operator is responsible for providing maintenance, maintaining all decals or warning labels and while in use, maintaining the unit in good
working order. If the owner and/or operator is not fluent in English, French or Spanish, the product warnings and instructions shall be read and discussed
with the operator in the operator's native language by the purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety
information shall be emphasized and understood prior to usage. The UNIJACK shall be inspected per the instruction manual prior to use.
Raising vehicle:
1. Make sure both UNIJACK and vehicle are on hard level surface.
2. Set parking brake and block wheels with chocks to prevent accidental rolling.
3. Consult vehicle owners manual to locate recommended lifting points.
Note: All Unibody vehicles have factory-specified jack points. These jack points must be used to avoid potential damage to the vehcle.
Consult your vehicle owner's manual for more information.
4. Position UNIJACK under recommended lifting points.
5. Remove locking pin and adjust ratchet bar extension to desired height below lifting points.
6. Engage locking lever by pushing downwards towards ground
7. Turn release valve clockwise to closed position. DO NOT OVER-TIGHTEN!
8. Insert pump handle into pump socket.
9. Raise vehicle to desired height by pumping handle.
10. As vehicle rises, the locking lever should engage ratchet bar to prevent accidental lowering.
Lowering vehicle:
1. Remove all obstructions from under the vehicle.
2. Lift vehicle by pumping handle to unload locking lever.
3. Lift upward on locking lever until it locks in the upward position.
4. Turn release valve counterclockwise SLOWLY to lower vehicle. Do not let anyone under vehicle while lowering.
5. Remove UNIJACK from under the vehicle.
The product shall be maintained in accordance with the product instructions. No alterations shall be made to this product.
1. Before use, a visual inspection of the UNIJACK should be made for abnormal conditions such as cracked welds, damaged, bent,
worn, loose or missing parts, or hydraulic leaks.
2. Inspections shall be performed in accordance with this manual.
3. If the UNIJACK is subjected to abnormal load or shock, remove from service.
4. Repair of this equipment requires specialized knowledge and facilities. If you encounter any problems or difficulties, please do not return this UNIJACK
to the store. Please contact our toll free customer service department at: 1-800-423-3598.
DAMAGED EQUIPMENT: Any UNIJACK that appears to be damaged in any way, is found to be worn, or operates abnormally
SHOULD BE REMOVED FROM SERVICE. Please contact our toll free customer service department at 1-800-423-3598 if you have any questions.
6000 LBS. UNIJACK™
OWNER AND/OR OPERATOR RESPONSIBILITY
OPERATION
INSPECTION
P R N D 1 2
P R N D 1 2
Publicidad
