Kohler K-13660 Guia De Instalacion página 6

4. Installation Checkout
NOTE: This faucet can only be used with the Kohler K-13667 power
supply, available separately.
Plug the power supply into the appropriate outlet.
Plug the faucet lead wire into the power supply connector.
Connect the P-trap.
Ensure that all connections are tight.
For touchless faucets equipped with vandal-proof aerators: Use
the key provided to remove or install the aerator.
Open the drain.
Open the water supplies.
Test the faucet by placing an object under the spout in front of
the sensor. The faucet should turn on. The faucet should turn off
after the object is removed.
If faucet does not turn on:
Check that there is power to the receptacle.
Power supply must be plugged in to receptacle.
Faucet lead wire must be plugged in to power supply.
Supply lines must be open.
Strainer screen must be clean.
1031174-2-A 6 Kohler Co.