WARNING: RISK OF BURNS
WHAT CAN HAPPEN
Touching exposed metal such as the
compressor head or oubet tubes, can
result in serious burns.
HOW TO PREVENTIT
Never touch any exposed metal parts
on compressor
during or immediately
after operation. Compressor
will remain
hot for several minutes after operation.
Do not reach around protective shrouds
or attempt
maintenance
until unit has
been allowed to cool.
WARNING: RISK FROM MOVING PARTS
_--_
_
WHAT CAN HAPPEN
Moving parts such as the pulley, flywheel,
and belt can cause serious injury if they
com into contact with you or your
clothing.
HOW TO PREVENT IT
Never operate the compressor
with
guards or covers which are damaged
or
removed.
Attempting
to operate compressor with
Any repairs
required on this product
damaged or missing parts or attempting
should be performed
by authorized
to repair compressor with protective
service center personnel.
shrouds removed can expose you to
moving parts and can result in serious
injury.
WARNING:
RISK OF FALLING
I_
WHAT CAN HAPPEN
HOW TO PREVENT IT
A portablecompressor can fall from a table,
Always operate compressor in a stable aecure
workbenchor roof causing damage to the
position to preventaccidental movement ofthe
compressor and could result in serious
unit, Never operate compressor on a roof or
injury or death to the operator,
other elevated position. Use additional air
hose to reach high locations.
= V.'_'4d-'1=
WARNING: RISK OF SERIOUS INJURY OR PROPERTY
DAMAGE
WHEN
TRANSPORTING
COMPRESSOR
(Fire, Inhalation, Damage to Vehicle Surfaces)
WHAT CAN HAPPEN
HOW TO PREVENT IT
Oil can leak or spill and could result in
Always place compressor
on a
fire or breathing hazard; serious injury or
protective
mat when transporting
to
death can result. Oil leaks will damage
protect against damage to vehicle from
carpet, paint or other surfaces in vehicles
leaks. Remove compressor from vehicle
or trailers,
immediately upon arrival at your
destination.
7- ENG
D29761