Publicidad
Idiomas disponibles
Idiomas disponibles
12
Playing a Tape
Recording a CD
Recording a CD: Selecting
Tape Length
Automatically (tape
select edit)
Recording a CD: Specifying
Tape Length (time edit)
Recording a CD: Specifying
Track Order (programme
edit)
Recording From the Radio
Recording From Another
Tape (dubbing)
Chapter 4: the Tape Player
Playing a Tape
You can use TYPE I (normal), TYPE II
(CrO2) and TYPE IV (metal) tapes. When
you insert a tape, the deck detects the tape
type automatically.
POWER—ON
DOLBY NR
DIRECTION
1 Press EJECT to open tape
compartment.
Insert a recorded tape in deck A or B
with the tape side down and the side
you want to play facing forward. Push
to close the compartment.
2 Press [> (to play the front side) or <J
(to play the reverse side).
The tape starts playing.
Press DIRECTION
to select
One side of the tape
==
Both sides*!
=
Both decks in
RELAY
succession"*
To play
*! The deck stops automatically after
repeating the sequence five times.
* See "To play both decks in succession
(relay play)".
To
.
Press
Stop play
Resume play after
4% PAUSE ((]])*),
pause (Deck Bonly)
<I or
(DECK A (> or
DECK B [>"*)
Fast forward
iP for front side
"44 for reverse side
Rewind
44 for front side
bP for reverse side
Remove the cassette
@ EJECT
*
Remote
a((*
Pause (Deck Bonly) 1 PAUSE ( {]] *)
To control with the remote
1 Press DECK A[> or DECKB[> to
play the front side and press
DECK A[> or DECK B [> again to
play the reverse side.
2 Press the desired operation button.
To piay both decks in succession .
(relay play)
Relay play always follows the following
sequence. When the reverse side of the tape
in deck B finishes playing, the following
sequence continues four more times.
Deck A
Deck A
(Front side)
— >| (Reverse side)
Deck B
(Front side)
1 Press 2 EJECT and insert recorded tapes
in both decks.
2 Press DIRECTION repeatedly until
"RELAY" appears in the display.
3 Press <J or > on either deck.
To stop relay play, press Ml.
Deck B
(Reverse side)
[*~
Et
To cancel relay play
Press DIRECTION repeatedly until "=="
or "C=" appears in the display.
When listening to a tape recorded with the
Dolby* 8-type noise reduction system
Press DOLBY NR button so that "DOLBY
NR B" appears in the display.
The setting affects both.decks. Dolby-noise - -
reduction system reduces tape hiss noise in
low-level high-frequency signals.
*
Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation.
"DOLBY" and the double-00 symbol D
are trademarks of Dolby Laboratories
Licensing Corporation.
One Touch Play feature
Press [> or <] when the power is off.
You can listen to the tape without pressing
any other buttons when a tape is in the
deck. When a tape is not in the deck, the
system will just turn on.
Automatic Source Selection
If you press
> or <J (or DECK A[> or
DECK B[> on the remote) while you are
listening to other sound source, the tape
deck is selected and the play starts
automatically.
Publicidad
