Publicidad
Idiomas disponibles
Idiomas disponibles
Dong
Se
NR
a
aaa
Recording a CD
You can record from a CD to a tape.
Use TYPE I (normal) or TYPE II (CrOz)
tapes. Do not use TYPE IV (metal) tapes for
recording.
To listen to other sources while recording,
you must stop recording.
Recording a CD
Automatically
By using CD SYNCHRO, you can record
froma CD to a tape quickly.
Use the buttons on the unit to do this
operation.
POWER-*+ON
SURROUND
TS
|
Rh
8
ole
ONC)"
a
=e]
ot
|
~'
vi
DOLBY NR
1 Press 4 EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2 Press @ OPEN/CLOSE and place a CD.
Then, press & OPEN /CLOSE again to
close the disc tray.
3 select dual or single-sided recording.
To record
Press DIRECTION
to select
One side of the tape
==
Both sides*
=? or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
4 Press CD SYNCHRO.
Deck B stands by for recording.
5 Press ft PAUSE to release recording
.
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
To stop recording
Press Ml on deck B or the CD player.
To add the surround effect
Press SURROUND so that "SUR timaun"
appears in the display.
You can record the sound with surround
effect. The equalizer you adjusted will no
be recorded.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that "DOLBY NR B" appears
in the display after step 3.
Recording a CD Manually
You can record a CD as you like, for
instance, record just the songs you want or
record from the middle of the tape.
POWER—ON
viah.
=a "JRO
WN)
BOO
1 Press & EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2 Press 2 OPEN/CLOSE and place a CD.
Then, press 2 OPEN/CLOSE again to
close the disc tray.
3 Press FUNCTION repeatedly until "CD"
appears in the display.
4 select dual or single-sided recording.
To record
Press DIRECTION to
select
One side of the tape ==
Both sides*
==> or RELAY
*
Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5 when you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR so that "DOLBY NR
B' appears in the display.
6 Press @ REC.
Deck B stands by for recording.
7 Press 11 PAUSE to release recording
pause.
Recording starts.
8 Press Dit on the CD player.
The CD starts playing.
To
Press
Stop recording
HB on deck B
Pause recording
§§ PAUSE
Stop CD play
on the CD player
Pause CD play
Pil on the CD player
[is Sos earauiais Scan
Rae rene
Recording a CD:
Selecting Tape
Length
Automatically (tape
select edit)
You can have the stereo system select and
indicate the most suitable tape length for
recording each disc automatically.
You cannot use Tape Select Edit for discs
which contain 21 tracks or more.
AN
OF
ot
continue to next
page >
Chapter 4: the Tape Player
13
Publicidad
