Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Guide
Always use two people when setting up the base
STEP 1
Place the bed base box in a desired location with the top of the box facing up. Remove
the binding straps and packing materials, making sure not to puncture the box with any
sharp objects.
STEP 2
Remove the bed base from the box keeping the bottom of the base facing upwards.
STEP 3
To install the legs, thread the washer over the bolt of the leg with the recessed side
facing the leg, and tighten by hand.
Do not over tighten.
STEP 4
To sync two bases see detailed installation
instructions on page 18.
Locate the Power Down Box and install (2) 9 Volt Alkaline Batteries (not included).
11
Publicidad
