Installation And Operator Instructions - Lincoln Electric PRO-CUT 25 Manual De Instrucciones

READ AND UNDERSTAND INSTRUCTIONS: Read and understand this manual
before operating this equipment. Plasma cutting or gouging can be
hazardous. Failure to follow the instructions in this manual could cause
serious personal injury, loss of life, or damage to this equipment.
ELECTRICALLY POWERED EQUIPMENT: Turn off input power using the
disconnect switch at the fuse box before working on this equipment. Ground
this equipment in accordance with local electrical regulations.
ELECTRIC AND MAGNETIC FIELDS MAY BE DANGEROUS: Electric current flowing
through any conductor creates electric and magnetic fields (EMF). EMF fields
may interfere with some pacemakers, and welders having a pacemaker should
consult their physician before operating this equipment.
CYLINDER MAY EXPLODE IF DAMAGED: Use only compressed gas cylinders
containing the correct shielding gas for the process used and properly
operating regulators designed for the gas and pressure used. Always keep
cylinders in an upright position securely chained to a fixed support. Do not
move or transport gas cylinders with the protection cap removed. Do not
allow the torch, work clamp or any other electrically live part to touch a gas
cylinder. Gas cylinders must be located away from areas where they may be
subjected to physical damage or the cutting process including sparks and
heat sources.
WORK MATERIALS CAN BURN: Cutting generates a large amount of heat. Hot
surfaces and materials in work area can cause serious burns. Use gloves and
pliers when touching or moving materials in the work area.
CE COMPLIANCE: This equipment complies to the Central European directives.
SAFETY MARK: This equipment is suitable for supplying power for cutting
operations carried out in an environment with increased hazard of electric
shock.

Installation and Operator Instructions

Read this entire section before installation
or operation of the machine.
Location and Environment
This machine will operate in harsh
environments. However, it is important
that simple preventative measures are
followed to assure long life and reliable
operation.
• Do not place or operate this machine on
a surface with an incline greater than
15° from horizontal.
• This machine must be located where
there is free circulation of clean air
without restrictions for air movement
to and from the air vents. Do not cover
the machine with paper, cloth or rags
when switched on.
• Dirt and dust that can be drawn into the
machine should be kept to a minimum.
• This machine has a protection rating of
IP21. Keep it dry when possible and do
not place it on wet ground or in
puddles.
• Locate the machine away from radio
controlled machinery. Normal
operation may adversely affect the
operation of nearby radio controlled
machinery, which may result in injury or
equipment damage. Read the section
on electromagnetic compatibility in this
manual.
• Do not operate in areas with an ambient
temperature greater than 40°C.
Input Supply Connection
Check the input voltage, phase, and
frequency supplied to this machine before
5