Descargar Imprimir esta página

universalblue UTE30L-18 Manual De Instrucciones página 26

Termo eléctrico 30l / 50l /80l / 100l

Publicidad

Idiomas disponibles

Idiomas disponibles

and functioning properly and replace defective ones if necessary.
Any leakage in the hot water taps will increase the electricity
consumption.
Installation and maintenance must be carried out by qualified
personnel
maintenance instructions must be respected.
The appliance must be installed in a suitable closed room (to
avoid appliance freezing);
The appliance is only intended for domestic use.
Install the electrolytic sleeves, fill the water heater with water
before connecting it to the mains, and check the magnesium
anode every 6 months to prevent possible corrosion.
Before installing, check the wall to install the unit is firm
enough or not, if it can stand the weight of unit fullfilled with
water. If the wall in air brick, should take reinforce measure.
Meanwhile, the expansion bolt can't be installed in the space
between bricks.
After checking that that wall is strong enough to fix 2 hooks of
suitable size (not supplied)to it, making sure they a securely
anchored. (See fig. 3.1)
To connect the electric water heater to the water, please consider that
inlet and outlet are marked as follows:
in
compliance
Fig 3.1
with
current
regulations;
the

Publicidad

loading

Este manual también es adecuado para:

Ute50l-18Ute80l-18Ute100l-18