Publicidad
Idiomas disponibles
Idiomas disponibles
52. The nylon line will run on for a few seconds after the tool is switched off! Do not touch moving hazardous
parts before the machine is disconnected from the mains and the moving hazardous parts have come to a
complete stop.
53. The type of extension cord to be used shall not lighter than H05VVF or H05RNF.
54. Always wear substantial footwear and long trousers while operating the machine.
55. Always disconnect the machine from the power supply
-
Whenever the machine is left by the user
-
Before cleaning a blockage
-
Before checking, cleaning or working on the machine
-
After striking a foreign object to inspect the machine for damage
-
If the machine starts to vibrate abnormally, for immediately check
56. Never to operate the machine with defective guards or shields, or without safety devices, or if the cord is
damaged or worm.
57. Do not connect a damaged cord to the supply or touch a damaged cord before it is disconnected from the
supply for the reason that damaged cords can lead to contact with live parts.
58. Disconnect the supply immediately in the event of accident or breakdown.
59. Connect the machine only to a supply circuit protected by a residual current device with a tripping current of
not more than 30 mA.
60. Avoid using the machine in bad weather conditions especially when there is a risk of lightning.
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards
may arise in connection with the tool's construction and design:
Damage to lungs if an effective dust mask is not worn.
Damage to hearing if effective hearing protection is not worn.
Health defects resulting from vibration emission if the power tool is being used over longer period of time or not
adequately managed and properly maintained.
WARNING! This machine produces an electromagnetic field during operation. This field may under some
circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their physician and the medical implant manufacturer before
operating this machine.
Assembling
Assemble main handle and middle tube (see Figure 1): Insert two parts together, fix two parts by the screw.
Assemble motor housing and middle tube (see Figure 2): Insert two parts together, fix two parts by the screw.
Publicidad
