Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the spool assembly from the trimmer. To do so, hold the outer ribbed part of the assembly with one hand,
while pushing down and turning the spool head with the other to unlock it. The spool carrier and spool will now
disassemble easily.
Note: There is a spring inside the head that could easily be lost. Ensure that it is put in a safe place.
Insert the line through the eyelet in the spool carrier and slide the spool into it.
Making sure to insert the spring, assemble the spool and spool carrier back onto the trimmer. To do so, push the spool
cover until it locks.
To test if the line is advancing properly, push the button with your thumbs while pulling the wire with your fingers.
The line should advance freely.
Note: use only manufacturer's recommended replacement spool
Maintenance and storage
-
Keep all nuts, bolts and screws tight to be sure the equipment as a safe working conditions.
-
Allow the engine to cool before storing in any enclosure.
-
To reduce the fire hazard, keep the engine storage area free of grass, leaves or excessive grease.
-
Replace worn or damaged parts.
-
Use only manufacturer-recommended replacement parts and accessories.
-
Never clean or spray a machine with water. Clean the motor housing only with a moist cloth and never use
detergents or solvents! These could ruin the plastic parts of the machine. Finally, dry the motor housing
carefully.
-
Store the machine with the supplied protection cover.
Don't operate the tool before it is assembled completely.
-
Don't disassemble the protective guard by the user own when cleaning the tool. It should be sent to the
-
-
Maintenance station for the cleaning work.
Parts List
Item
Description
No.
1
Protective cover
2
Blade
3
Left motor housing
4
Right motor housing
5
Cable clamp
6
Middle plastic tube
7
Connect cable #1
8
Screw ST4x14
9
Right auxiliary handle
10
Screw ST4x12
11
Left auxiliary handle
12
Right handle
13
Switch
14
Switch trigger
15
Left handle
Item
Qty
No.
1
16
1
17
1
18
1
19
3
20
1
21
1
22
22
23
1
24
7
25
1
26
1
27
1
28
1
29
1
Description
Cable retainer
Cable
Connect cable #3
Wiring terminal
Capacitance
Motor assembly
Cutting head socket
Copper rivet
Nut M5
Stopple
Spring
Spool
Nylon thread DIA.1.2 x 6m
Spool cover
Qty.
1
1
1
1
1
1
1
2
1
1
1
1
1
1
Publicidad
