Cloer 4890 Instrucciones De Uso página 7

Technical Data
Type Volt
4890
220-240
4891
Before the first use
• Read these operating instructions carefully before
using the appliance for the first time.
• Remove all packaging elements and stickers, but not
the rating plate.
• Place the electric kettle on a dry, flat, nonslip surface.
• Pour away the water of the first use.
CE Label / Safety information
The appliance meets the requirements
of the applicable EC directives.
The appliance is designed for indoor
domestic use only.
ATTENTION: The kettle will become
extremely hot during the process only
grasp the handle of the kettle
ATTENTION! Always unplug the
appliance when not in use and before
cleaning.
Operation
• Plug the appliance into the wall socket.
• Separate the kettle from the electrical base.
• Open the lid by pressing the button
• NOTE: for your safety, the lid is equipped with a lo-
cking mechanism. For example, in case the kettle falls
or tips over during the process the lid will remain clo-
sed to avoid hot water emerges. This way, the risk of
burn will be reduced.
• Fill up the kettle with water
• Close the lid by hand.
• MAKE SURE the water does not exceed the MAX
mark of the water level indicator (1,2l).
• Replace the kettle onto the basis station.
• The appliance is ready to be used.
• Press the on/ off button located under the handle.
The control light will light up.
• Once the water boils the kettle and the control light
will automatically turn off. The process can be stop-
ped any time by pressing up the on/off button.
• Raise the kettle from the base station to pour out the
water.
• IMPORTANT: make sure the appliance is off before
lifting the kettle off the base station.
Hz Watt
1850-2200
50
1850-2200
Overheating Protection
The kettle has a double protection in case of overhea-
ting. If you turn on the appliance accidently without
water or with insufficient water, this security feature
will turn off the appliance automatically. Once the
kettle is refilled with cold water the appliance will be
prepared to be used again.
Cleaning
• ATTENTION: do not clean the appliance under run-
ning water and do not immerse the appliance in water!
• Do not clean the appliance with abrasive cleaning
agents since these could damage the kettle.
• Remove stronger stains (water stains, fingerprints
etc.) with lukewarm water and a cloth or stain-
less-steel cleaners.
• Make sure these stainless-steel cleaners are not ag-
gressive or contain chlorine or acid.
• We recommend "Chromol" from the company Henke
Ecolab Deutschland GmbH.
• ATTENTION: Use it just in the exterior parts! Do not
use it in parts that are in contact with food or liquids
(inner part).
• Clean often the lime filter of the kettle. Presse the up-
per end of the filter downwards to remove it.
Decalcification
• It is advisable to decalcify to the appliance when
using calcareous water (depending on the degree of
hardness of the water, between 1-3 weeks). A regular
decalcification will assure constant quality, low elec-
trical consumption and a longer life of the appliance.
Use for this a normal liquid descaler and read the se-
curity safety.
• Tipp: if the water does not contain too many lime,
you can mix 5-6 tablespoons vinegar with 0,5l of wa-
ter as descaler.
• ATTENTION: do not cook this mix. Rinse the applian-
ce a couple of times after the decalcification.
Information
The lime quantity in every region is different. You
can ask your water company to know the hardness
of water in your region.
• Our warranty does not cover incorrect operation
due to the decalcification!
GB
7