If the appliance tips over for any reason, wait 10 minutes before
returning it to its original position. This allows the refrigerant
system pressure to equalize before turning it back on.
To move the appliance, disconnect it from the power supply and
remove all food inside.
Your appliance uses isobutane (R600a) as a refrigerant.
Although R600a is a natural and environmentally friendly gas,
it is flammable. Therefore, you should be careful during
transportation and installation of the product. In the event of a leak,
move the freezer away from open flames or heat source and
ventilate the room where the appliance is located for a few minutes.
REVERSIBLE DOOR
The side for which the fridge door opens can be altered from the right
side to the left side, in case your installation site requires it.
When replacing the door, make sure that the appliance is
completely turned off and disconnected from the power supply.
Note: it is recommended to call a technician or a specialized person to
change the opening side of the door.
Tools you will need to change the door:
8mm socket wrench
Flat screwdriver
Cross screwdriver
8mm wrench
42