Publicidad
Idiomas disponibles
Idiomas disponibles
TABLAS · TABLES · TABELAS ·
The remote control does not work,
but the wall switch does.
The
fan
swings
connected and moving.
Problema
O controle remoto não funciona e o
interruptor de parede também não
funciona.
12
Change the batteries in the remote control
The remote control has deprogrammed itself. You
can reprogram the remote control following these
steps:
• Step 01-A: Set the wall switch to the Closed/
Off mode so that no power is supplied to the
product. Then turn it to Open/On mode to
supply power to the product.
• Step 02-B: Press the central on button (white)
and HI at the same time (for at least three
seconds).
• Step 03-C: The fan will make a "beep" sound
for three seconds and the controller will be
working properly.
• Check that the controller is working by
pressing different speeds.
when
it´s
Make sure the assembly was done correctly.
The fan is uneven. Use the fan blade balancing kit
to solve it.
Troque as pilhas do controle remoto.
Verifique as ligações elétricas, pode ter ocorrido
uma instalação incorreta.
O problema pode ser com o receptor, entre em
contato com nosso SAT
Possível solução
Publicidad
