Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical Connection
A qualified person in accordance with all applicable codes and
standards must do electrical wiring. Turn off electrical power at
service entrance before wiring.
If the supply cord is damaged,it must be replaced by the
manufacturer,its service agent or similarly qualified persons in
order to avoid a hazard.
Do not use the plug and an extension cord other than the
ones initially supplied with the hood.
INSTALLATION
Before beginning installation, to better
handle
removing the aluminium filter.
Before fixing, the outlet exhaust duct
for air evacuation to the outside
must be installed. Use an outlet
exhaust duct with:
-
Minimum indispensable length
-
Minimum
(maximum angle of bend: 90º);
-
Certified material (according to
local,
regulations); and as smooth as
possible inside. It is also advisable
to avoid any drastic changes in
duct cross-section (recommended
diameter: 125mm).
Drill the hole in the wall for the air
outlet (133 mm diameter) referring to drawings here on the right
where the measurements for the various possibilities are
indicated.
the
hood,
possible
building
we
advise
bends
and
fire
23
Publicidad
