Franke FST DRIP-FREE 60 X/2 KL Manual De Uso página 14

4. CONTROLS
T1
Key Key press
T1 Short
Long press with
all loads off (mo-
tor and lights)
T2 Short
Long press with
light on
T3 Short
Long press with
light or motor on
Long press with
all loads off (mo-
tor and lights)
T4 Short
Long press with
all loads off (mo-
tor and lights)
T5 Short
14
T2
Function
Turns the motor on/off at the first speed.
K-Link uncoupling
Starts the procedure for the cancellation of all compatible K-Link
devices previously coupled with the K-Link coupling function.
Turns the motor on/off at the second speed.
Activates/Deactivates the Activated Carbon Filters alarm.
Turns the motor on at the third speed.
Turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. At the end of this time, the system
automatically returns to the previously selected speed. If activated
with the motor off, once the time has passed it switches to OFF mode.
When the carbon filters alarm is activated, the Intensive speed is
no longer timed to 6 minutes but has an infinite duration.
The Filter saturation alarm is reset.
Signals the saturated Metal Grease Filters alarm and the need to
wash them. The alarm is activated after 100 hours of effective hood
operation.
Signals the Activated Charcoal Odour Filter saturation alarm. The
alarm is activated after 200 hours of effective hood operation.
Activates/Deactivates the Automatic operating mode.
AUTO mode is deactivated whenever any other keys are pressed.
AUTO mode is activated when the key is pressed or the Coupled In-
duction Cooktop is turned on. The hood speed is automatically set
using the highest power level present on the hob. When the induction
cooktop is turned off the last activated speed is held for 5 seconds,
then speed 1 for 15 minutes. Once the 15 minutes have passed the
motor turns off. The light status does not change.
K-Link coupling
Before starting the procedure follow the specific instructions of the
manuals of the devices to be coupled.
For the remote control, see "connected mode".
Starts the pairing procedure between the hood and compatible K-Link
devices (induction cooktop or remote control). Up to 3 induction cook-
tops can be paired and only one remote control. See the manual of
the devices for details of the operations that need to be performed on
these.
The coupling procedure takes 2 minutes. If no devices are recognised
within this time check that you have previously activated the proced-
ure for the devices to be coupled. The maximum number of linkable
devices may have been reached.
The lights alternate between high intensity, medium intensity (if
present), off.
T3 T4 T5
LED
On / Off
Upon successful com-
pletion of the procedure
LEDs T1 and T2 flash 5
times.
T1 and T2 On / Off
T1 flashes twice:
alarm activated.
T1 flashes once:
alarm deactivated.
T1 and T3 On / Off
Flashing
T1 flashes 3 times.
T1 flashes slowly
T1 flashes fast
Fixed light:
AUTO mode activated.
Off:
AUTO mode temporarily
deactivated.
LEDs T1 and T2 flash-
ing:
coupling in progress.
Upon successful com-
pletion of the procedure
LEDs T1 and T2 will
light up for 2 seconds.
On / Off