Display And Controls - OHAUS STARTER 300 Manual De Instrucciones

STARTER 300 Portable pH Meter
1.3

Display and controls

Displays
7
1 Electrode condition
Slope: more than 95%
and offset: ± (0-15) mV
Electrode condition is good
2 Endpoint stability icon
3
Measurement icon -
4 Calibration icon -
5
Setup icon -
6 Battery status icon shows the condition of the batteries - fully charged, half-charged or fully
discharged
7 pH/mV reading or slope in calibration process
8 Calibration point
9 Auto temperature compensation - ATC ; Manual temperature compensation - MTC
10 Temperature during measurement or offset in calibration process
1 2
8
or offset: ± (15-35) mV
Electrode condition is
acceptable
; Auto endpoint icon
; measurement or calibration is running
; calibration in progress
; instrument is in the setup mode
/ Buffer group
3 4
9 10
Slope: 90-95%
/Memory number
5 6
Slope: less than 90%
or offset: ± (>35) mV
Electrode condition is not
good or needs cleaning
/ Error index
EN 3
-