Descargar Imprimir esta página

Panasonic TX-48MZ800E Manual De Funcionamiento página 21

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 140
selected accordingly. Set to Preferred Satellite to
watch operator channels, if you have performed
an operator installation. Set to General Satellite
to watch other satellite channels, if you have
performed a normal installation.
Satellite Re-scan: Start a satellite scan beginning
with the antenna selection screen. When this
scanning option is preferred, some scanning
configurations will not be available and thus the
preferences you made during the initial setup
process may not be changed.
For the General Satellite channel installation mode
the SatcoDX Scan option may also be available
here. For standard installation select Normal
scan. For SatcoDX installation select SatcoDX
Scan and copy the relevant sdx file into the root
directory of an USB storage device and connect it
to your TV. Highlight this option and press OK or the
Right directional button. The Download SatcoDX
option will be highlighted, press OK or the Right
directional button to continue. Select the sdx file
from the connected USB storage device and press
OK. Satellite selection screen will be displayed. The
status of the first satellite option will appear as On.
Highlight that satellite option and press OK. Set
the parameters corresponding to your system and
correct satellite and press the Back/Return button
to return to the satellite selection screen. Highlight
Next and press OK to proceed with the SatcoDX
channel list installation. If the selected satellite is not
correct for SatcoDX installation, a warning dialogue
will be displayed on the screen. The satellite/s that
can be selected will be listed. Press OK to close the
dialogue and press OK or the Back/Return button
to return to satellite selection screen. Then set the
satellite accordingly.
Satellite Add: Add satellite/s on which you want
to perform a channel scan. This menu option will
be active, if Channel Installation Mode is set to
General Satellite.
Satellite Update: Search for any updates by
repeating the previous scan with the same settings.
You will also be able to configure these settings
before the scan. Depending on the Channel
Installation Mode setting, this option may not be
available or named differently depending on the
available services. Highlight the satellite and press
OK to configure detailed satellite parameters.
Then press the Back/Return button to return to
the satellite selection screen. Highlight Next and
press OK to proceed.
Satellite Manual Tuning: Start a manual satellite
scan. Highlight the satellite and press OK to
configure detailed satellite parameters. Then
highlight Next and press OK to proceed.
Favourite Network Select: Select your favourite
network. This menu option will be active, if more
than one network is available. This option may not
be available depending on the selected country
during the initial setup process.
Auto Channel Update: Turn the auto channel update
function on or off.
Channel Update Message: Turn the channel update
message function on or off.
Note: Some options may not be available and appear as
greyed out depending on the operator selection and operator
related settings.
Inputs
Show or hide an input terminal, change the name of an
input terminal, and configure the options for HDMI CEC
(Consumer Electronic Control) function and display
the CEC device list.
Display & Sound
Picture
Picture Mode: Set the picture mode to suit your
preference or requirements. Picture mode can be
set to one of these options: Standard, Vivid, Sport,
Movie and Game.
Dolby Vision Modes: If Dolby Vision content is detected
Dolby Vision Bright, Dolby Vision Dark and Dolby Vi-
sion Vivid picture mode options will be available instead
of other picture modes.
Backlight, Brightness, Contrast, Colour, HUE,
Sharpness settings will be adjusted according to
the selected picture mode.
Energy Saving: Set your energy saving preference.
Off, Low and Middle options will be available.
OLED Luminance: If the Energy Saving option is
set as Off, this option will be manually adjustable.
Highlight and use the Left/Right directional buttons
to adjust.
Brightness: Adjust the brightness value of the
screen.
Contrast: Adjust the contrast value of the screen.
Colour: Adjust the colour saturation value of the
screen.
HUE: Adjust the hue value of the screen.
Sharpness: Adjust the sharpness value for the
objects displayed on the screen.
Advanced Settings
Colour Temperature: Set your colour tempe-
rature preference. User, Cool, Standard and
Warm options will be available. You can adjust
red, green and blue gain values manually. If one
of these values is changed manually, Colour
Temperature option will be changed to User, if
not already set as User.
English - 20 -

Publicidad

loading