MAKING A SPACE BETWEEN
PROGRAMMES
When recording music from the tuner or turntable, etc.,if a 4-to 5-
1 Push the
INTRO
SCAN/AUTO
SPACING
button
as soon
as
second space is made between each programme, this will allow
recording of the current programme
is finished.
operation of the APSS, single programme playback or introduction
After producing an approximately 4-second space, the unit will
scan playback features.
be set to the recording stand-by mode.
;
e To produce a blank space that is longer than 4 seconds, push
Oo
oO
Approximately 4-second space recording
the INTRO SCAN/AUTO SPACING button again before it goes
into the stand-by mode.
Side B
Another approximately 4-second space wil! be made at the
;
;
position where the button is pushed.
Side A
Recording
«if the PLAY button is pushed before the stand-by made,
recording will begin from there.
INTRO SCAN
AUTO SPACING
er
The INTRO SCAN/AUTO SPACING button will not function if
pushed during playback.
ERASING
RECORDED
TAPES
-_
When recording on a previously recorded tape, the recording on that
] Place the tape to be erased into the cassette compartment,
recording without recording new material, follow the procedure on
erase. (orp).
the right.
} 5
1
|
0
M
3 To erase both sides, set the indicator to display», then push the
AUTO REVERSE button.
it 1
RECORD
LEVEL o ,
je
4
4
Set the RECORD
LEVEL controls to 0.
LEFT ae
MIN
RIGHT]
Wh MP it
§} Push the RECORD button.
AX
& Push the PLAY button to begin erasing.
STOPPING THE TAPE TEMPORARILY
While recording or playing a tape, pushing the PAUSE button will
[ FF |
temporarily halt the tape. To resume recording or playback, push
the PLAY button.
This feature is convenient for skipping over commercials while
recording or for pausing while taking notes on recorded matter,
Tape resumes recording
To temporarily halt
or playback."
the tape.
STOPPING THE TAPE DURING PLAYBACK OR RECORDING
Push the STOP button.
|
E
The DIRECTION indicator will display the side that was being
played or recorded. {Either < orp)
ls
[E] 15