USE WITH EXTERNAL UNITS
RECORDING FROM MICROPHONES
Dynamic or electrostatic (condenser) type' microphones with low
1 To record in stereo, plug a pair of microphones into the Mic
impedance can be used with this cassette deck.
To monitor the
sockets.
recording, use headphones and turn down the valume control of the
e To record either the right or left channel in mono, plug 4 single
amine ro ts loweat level:
microphone into the MIC socket (RIGHT or LEFT).
—
Mic
© O
LEFT
RIGHT
2 Set the INPUT selector switch on the rear panel to the (DIN}MIC
position.
{DIN}
LINE
MIG
Left
Right
microphone
bi
microphone
3 Follow the procedure for RECORDING
FROM AN AMPLIFIER.
Refer to the instructions on page 14, —
DUBBING
In order to copy a cassette tape, the RT-350H can be connected to
another deck or tape recorder for dubbing in either direction {with
playback done by the RT-350H and the recording by the other unit, or
vice versa}.
RT-350H
Another deck
® Connection for dubbing from the RT-350H to
another deck. (Playback on the RT-350H and
To LINE OUT sockets
To LINE IN sockets
recording with the other deck.)
the RT-350H. (Playback on the other deck and
To LINE OUT sockets
recording with the RT-350H.}
To LINE IN sockets
HEADPHONES
"oO.
pe eey ans]
wie
«
The front-panel
PHONES
socket (8 ohms)
enables a set of
a
O
stereo headphones to be used for private listening and critical
a
B-TYPE
LEFT
RIGHT
monitoring of programmes that are being recorded,
_
won
leer
LEFT
RIGHT
,
e
Volume
level of the headphones can not be adjusted.
[E] 16