Mark MBAR BAT 144 WI Manual De Instrucciones página 6

ADVANCED USE
CONTROL PANEL
MBAR BAT 144 WI can be configured in different ways thanks to its panel and selection buttons.
In the following table are shown all the options displayed in the menu interface to set the MBAR BAT
144 WI:
No Display
1 dXXX
2 AXXX
3 S-SL
4
d-Ho
5 r-Fon
6 IRon
7 rxxx
8 Gxxx
9 bxxx
10 uxxx
11 Yxxx
12 Pxxx
13 Ixxx
14 FFxx
15 CLxx
16 CCxx
17 DExx
Press the MENU button (once or several times) until you get to the
desired function (according to the following chart), and press ENTER
to confirm your selection.
Use the UP & DOWN buttons to navigate between each function to
select the correct value. (Press ENTER to confirm the setting).
Function
Starting DMX channel code, (001-512) 6-channel mode
Starting DMX channel code, (001-512) 10-channel mode
DMX dimming speed. SL: slow dimming, FA: fast dimming
DMX signal loss processing setting: Ho: keep the last DMX state / off:
Turn off all LEDs
Wireless DMX control on/off
IR remote control on/off
Red dimming, from minimum to maximum
Green dimming, from minimum to maximum
Blue dimming, from minimum to maximum
White dimming, from minimum to maximum
Amber dimming, from minimum to maximum
UV dimming, from minimum to maximum
IR remote control sensitivity
Speed strobe, from slow to fast
15 kinds of colour output
Colour jumping, speed from slow to fast
Gradual colour change, speed from slow to fast
5