Mitsubishi DP-309 Manual página 4

4
@ When making unit connections, be sure that the power
switches of all units have been turned off, and also be sure that
the left and right channels are connected correctly.
@ Do not connect the output from the DP-309/DP-409R to the
PHONO input jack of your amplifier.
DP-409R
@ The power consumption of the DP-309/DP-409R is 17W. Be
sure the rated power capacity of the AC source matches.
@ If the DP-309/DP-409R causes RF noise with your tuner, try
moving them further apart.
When using .the commander away from the main unit, use it within
a radius of approximately 7 meters (23 ft.). Be sure to paint the
photo transmitter correctly at the photo receptor.
Photo receptor
Rear panel
Connect the red plug to R
(right channel)
Connect the white plug to L
(left channel)
Before attempting to use the commander, be sure to open up the
Connect the DP-309/DP-409R to wall cover on its bottom, and insert the supplied batteries.
AC outlet or to a convenient power
outlet of your amplifier, timer, etc.
Wall AC outlet
Amplifier
amplifier. If it is not eauipped with any of these
charge. Replace them with new batteries.
BATTERY SUPPLY: 1.5V x 2
SIZE: UM-4/AAA/RO3
When making connections to your amplifier,
refer to the owner's manual.