Concept VT8100 Manual Del Usuario página 24

EN
PRODUCT DESCRIPTION
1 Control panel
2 Display
3 Air outlet
4 Appliance body
5 On/Off switch
1
6 Storage space for remote control
7 Appliance handle
2
8 Remote control
3
4
CONTROL PANEL AND REMOTE CONTROL
DESCRIPTION
A "-" Temperature/time decrease button
B Timer button
C Oscillation button
D "+" Temperature/time increase button
E Appliance On/Off button
F Mode selection button
G Maximum power mode button
A
B.
C
46
6
7
C
D
A
G
E
F
DISPLAY DESCRIPTION
1 Child lock indicator
2 Timer indicator
3 ECO mode
4 Low heating mode
5 Medium heating mode
6 High heating mode
7 Light breeze mode
8 Stronger breeze mode
9 Oscillation indicator
10 Time indicator
11 Temperature indicator
8
INSTRUCTIONS FOR USE
1. Place the appliance on a stable surface or floor to prevent it from tipping over.
2. Connect the appliance plug to the mains.
3. Press the On/Off button (5). The appliance beeps.
5
4. Switch on the appliance with the On/Off button (E). The appliance starts operating in pre-set mode.
5. Press the mode selection button (F) and select one of the following programs:
5.1. Low heating mode – the appliance operates at minimum power, reducing noise and energy consumption.
5.2. Medium heating mode – the appliance operates at medium power, noise and energy consumption.
5.3. High heating mode – the appliance works at maximum power for fast room heating.
5.4. ECO mode – the appliance automatically sets the most suitable heating power. If the room temperature is 1 or
2 °C lower than the set temperature, the appliance heats at low power. If the room temperature is more than
2 °C lower than the set temperature, the appliance heats at high power. If the room temperature exceeds the set
temperature, the appliance stops working and starts heating again when the room temperature falls below the
set temperature.
5.5. Light breeze mode – In this mode, only the fan operates at low power. The appliance does not heat the room.
5.6. Stronger breeze mode – In this mode, only the fan operates at higher power. The appliance does not heat the
room.
6. To speed up the room heating, press the oscillation button (C). To stop the appliance from rotating, press the
E
oscillation button again.
7. In any mode, the desired heating time can be set in the range of 1-24 h (in intervals of 1 h) using the timer button (B).
F
Press the Timer button (B) and use the "+" and "-" buttons to set the desired time. The timer can be turned off at any
time by setting the time to 00:00.
D
8. Press the On/Off button (E) to switch off the appliance. The display starts a countdown of 15 s, during which only the
B.
fan is running.
VT8100 VT8100
1
2
3
4 7 5 8 9
EN
11
10
6
47