USING THE FOAM FILTER (WET VACUUM)
To vacuum liquids, ALWAYS use the
foam filter.
The elastic on the foam
filter must fit over the edge
Always remove the filter cartridge and the paper filter bag, if fitted.
Use the foam filter. The foam filter is not suitable for vacuuming
When the vacuumed liquids reach the maximum level inside the drum, suction is
automatically cut off by the safety float. The user is alerted by an increase in the
RPM rate of the motor and the lack of suction. Turn off the appliance immediately
and empty the drum.
VACUUMING LARGE
QUANTITIES OF LIQUID
To ensure partial airflow, make sure
that the crevice tool is never fully
submerged.
CLEANING THE FOAM
FILTER
Rinse the foam filter with
water. DO NOT use detergent.
Replace if worn or torn.
DV 80 LBN
(V).
Class 'H' dust.
MAX-VAC.COM
F
19