Publicidad
Idiomas disponibles
Idiomas disponibles
This appliance has been designed to operate with alternating current only.
Before starting the appliance, check that the mains voltage corresponds to that
indicated on the data plate.
Check that the electric system is fitted with a differential switch (type automatic
cut-out)
Use an extension cable only if in perfect conditions and make sure that the
cross-section is appropriate for the power of the appliance plus the power of the
electric tool.
Never leave the appliance running unattended.
If the discharge air is released back into the working environment, it must have
a sufficient Class 'M' air exchange index. In order to observe the required limit
values, the flow rate must be maximum 50% of the fresh air flow rate (volume
of the environment VR by air exchange index LW). Also comply with the
regulations in force.
Completely unwind the power cable before starting the appliance.
Do not aim the suction hose at ears, eyes, hair, persons or animals in general.
During transport of the appliance, the motor must be off. Also ensure that the
appliance cannot disperse dust into the environment and that it is in a stable
position
Shut off the machine in the case of high dust emission, fire or smoke. Using
the appliance is allowed only after it is checked an repaired by an authorized
person.
Risk of falling:
Do not climb onto or sit on the cover of the
appliance.
6
DV 80 LBN
MAX-VAC.COM
Publicidad
