Using the trimmer
Shaving longer, curly hairs under
the chin (see fig. 4)
Slide the trimmer switch up to the 1st
position. This position makes the
trimmer an intercept cutter, cutting
long hairs while the outer foil shaves
shorter hairs. Make sure that the trim-
mer is facing outward away from the
neck.
Trimming sideburns (see fig. 5)
Slide the trimmer switch up to the 2nd
position.
Place the trimmer at a right angle to
your skin and move it downward to
trim sideburns.
Cleaning your shaver
After every shave, press the foil frame
release button to pop open the foil
frame. Turn the shaver on and rinse
the inner blade under running water
or in a basin (see fig. 6). After rins-
ing, switch the shaver off and leave
it to dry without closing the foil frame
and the protective cap. After the
shaving head dries, close the foil
frame and replace the protective cap
on the shaver.
Replacing shaving head
components
It is recommended that you replace
the outer foil at least every year and
the inner blade at least every two
years to maintain your shaver's cut-
ting performance.
Remove the outer foil
Press the foil frame release button
to pop open the foil frame. Pull the
foil frame vertically out of the upright
shaver. Remove the outer foil from
the frame by slipping it off the hooks.
(Caution: The foil may spring out
when released from the hooks.)
Insert the new outer foil
Slip the foil into the frame with the
plastic edges facing inward. Guide
the plastic edges onto the hooks in
the frame (see fig. 7).
Remove the inner blade
Pull the open foil frame vertically out
of the upright shaver to remove the
foil frame. Remove the inner blade
by grasping it firmly at both ends and
pulling straight away from the shaver.
Insert the new inner blade
.
Hold the inner blade at both ends and
press downward until it snaps into the
shaver (see fig. 8).
ATTENTION:
The product you have purchased
is powered by a nickel cadmium
battery which is recyclable. At the
end of it's useful life, under vari-
ous state and local laws, it is ille-
gal to dispose of this battery into
your municipal waste stream.
Please call 1-800-8-BATTERY for
information on how to recycle this
battery.
&