Panasonic CX-DP88U Manual De Instrucciones página 16

Installation Guide continuea
Q Installation Location
E
N
G
L
)
S
H
e In areas hit by direct sunlight, hot air from the heater, or any other high-temperature location.
e In an area where you cannot firmly secure the unit, or in high-vibration areas.
e In areas with high humidity or high dirt and dust levels.
How to install this unit
Use a screwdriver to set the angle-adjusting screw to the position "V" or "H," depending on the mounting angle
selected. (When shipped from the factory, the angle-adjusting screw is set to the "H" position as default.)
e When setting vertically: Set to the "V" position.
e When setting horizontally: Set to the "H" position.
This unit can be set in the five direc-
tions: horizontal, vertical, and the posi-
tions A (22.57, B (45º), and C (67.57).
Mount the unit by referring to the fig-
ures below.
Cautions:
e Set the angle-adjusting screw to the same angle as
selected.
e Set the hole to the same positions for both left and
Selecting a mounting angle
Horizontal:
Set the screw to the same
Limit to leas than 10 degrees. positions for both left and right.
Typical vertical installation
Do not tilt in this Limit to
direction. Limit less than
to tess than 10 10 degrees.
degrees.
(Normal) (Up-side down)
Ur
16 CX-DP88U
Set the screw to the same
positions for both left and right.