Publicidad
Idiomas disponibles
Idiomas disponibles
Select a location where
the unit should
be
mounted. Fix the base brackets with a double-
faced adhesive tape.
Mount a mounting bracket (L) or (R) on either
side of the main unit with a hex. bolt together
with double washers (M4 x 8 mm).
Typical horizontal installation
© Mounting
bracket (R)
@ Base bracket x 2
O Mounting
bracket (L)
@ Hex. bolt with double wash-
ers (M4 x 8 mm) x 4
in accordance
with the locations of the M5
balts of the base brackets.
@ Base bracket x 2
Fix both the base brackets and the double-faced
adhesive tape to a mounting surface below the
carpet.
Relationship between
mounting holes and angles
Mount the unit with the mounting bracket on either
side with a hex. bolt with double washers (M4 x 8).
O Mounting bracket (L)
O Mounting
bracket (R)
Mounting bracket (L)
Mounting bracket (R)
The
relationship
between
mounting
holes
and
angles of the mounting brackets (L and R) is illus-
@ Hex. bolt with double
'
trated above. Symbols corresponding to the mount-
washers (M4 x 8 mm) x 4
A
ing angles are marked near the respective holes.
;
Select the correct holes in accordance with the
mounting angles to be used.
CX-DP88U
17
Publicidad
