LB340 and LBN340
1. Remove the glass door by unscrewing the eight lock screws 3 and 4. Be careful to hold the glass
door firmly after removing the screws and place it on a padded surface to avoid the risk of damage.
2. Unscrew and transfer the door supporter 2 to the opposite side.
3. Rotate the glass door 180°and refit the glass door to the opposite side. Then screw and tighten it
after the door is leveled.
LB720V and LBN720V
1. Remove the glass door by unscrewing the eight locking screws (5) and (6). Be sure to hold the glass
door firmly after removing the screws and place it on a padded surface to avoid possible damage.
2. Loosen the screws (1) and (3) then transfer the door bracket (2) and the decorative cover (4) to the
opposite side.
3. Rotate the glass door 180 ° and replace the glass door on the opposite side. Then screw and tighten
it once the door is leveled.
1
3
4
1
2
2
6
6
5
5
3
4
2
1
115