cecotec EnergySilence 1000 Smart Control Manual De Instrucciones página 38

Ventilador de pie de 16” con 25w y motor dc

Idiomas disponibles

ENGLISH

2. Insert both tubes (already connected) into the hole in the base and fix them properly with

the screw in the base. Fig. 3

3. To finish assembly, insert the fan bracket into tube 1. Make sure they fit properly.

4. Next, turn it clockwise to fix it. Fig. 4

4. OPERATION

Control panel

Fig. 5

1. Power icon

2. Speed icon

3. Oscillation icon

4. Timer icon

5. Display

NOTE: you can control the fan by using the control panel on the top of the fan or the remote

control.

1. Plug the fan into a mains socket. When you do so, you will hear a beep and the room

temperature will be shown on the display.

2. To switch on the fan, press

3. Press

to select the desired speed. It has 8 speeds.

NOTE: the selection will appear on the display (P1/P2/P3/P4/P5/P6/P7/P8).

4. Press

to activate/deactivate the oscillation function.

5. Press

to select the operating time. The minimum time that can be selected is 1 hour,

and the maximum time is 12 hours. The selection interval is 1 hour.

Note: a beep will sound each time an icon/button is pressed.

Warning: only use the adapter supplied.

Remote control

Fig. 6.

NOTE:

Before using the remote control, remove the plastic film covering the battery.

The battery in the remote control is of type CR2025.

The remote control has the same functions as the fan control panel.

ENERGYSILENCE 1000 SMART CONTROL

. By default, it will start at speed 1.

08217