5.
Specifications / Especificaciones
EN
Voltage
Frequency
Speed
Motor torque
ES
Tensión
Frecuencia
Velocidad
Par motor
6.
Installation for Control Panel / Instalación del panel de control
EN
1. The system key diagram is laid out as follows:
ES
1. El diagrama de las claves del sistema es el siguiente :
EN
2. Function of Each Key:
(1) "
" key
The "P" key serves two functions. Its primary function is to adjust the needle
position. A direct press toggles the needle position up or down. When the
upper pinhole light illuminates, it indicates the needle is in the raised
position. If the lower pinhole light is on, the needle is in the lowered position.
If both lights are off, the needle is not set to any position.
The secondary function of the "
various functions.
220V 2 phase / 110V 2 phase
50~60HZ
200-4,000 SPM
<2.2NM
220V 2 fases / 110V 2 fases
50~60HZ
200-4,000 PPM
<2,2NM
" key is to act as the Enter button for
3