geberit Pluvia Instrucciones De Montaje página 5

Basic safety notes
Intended use
The Geberit Pluvia heater is only allowed to be used with Geberit Pluvia roof outlets with a ø 56 mm
straight connector.
Use for any other purpose is deemed improper. Geberit will not accept any liability for any resulting
damage.
User qualifications
The Geberit Pluvia heater is only allowed to be installed by qualified plumbers or roofers.
The Geberit Pluvia heater is only allowed to be connected by a licensed electrically skilled person.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children must not play with the appliance. Cleaning and user maintenance must not be
carried out by children without supervision (in accordance with EN 60335-1
1) The basis for this standard is the international standard IEC 60335-2-45. IEC is the International Electrotechnical
Commission.
This IEC 60335-2-45 is also used as the basis for various national standards,
e.g. AS/NZS 60335.2.45, GOST IEC 60335-2-45, SANS 60335-2-45.
Additional information and instructions to be observed
WARNING
Electric shock
Incorrect installation can lead to death or serious injuries.
▶ Switch off all mains circuits before accessing the terminals.
▶ Install the heater with a 30 mA residual-current device.
▶ Install the heater with an all-pole disconnecting device with a contact opening that
complies with the conditions of overvoltage category III for full disconnection.
▶ The heater should only be connected by an electrically skilled person.
• Before the installation, read through the manual and follow the instructions.
• Before the installation, read through all safety notes and follow the instructions.
• Keep the installation manual at hand for reference during installation.
• Do not install any product that has visible defects.
• Do not modify or convert the product yourself.
• Ensure there is sufficient space and lighting available during installation.
• In Germany, observe DIN VDE 0100-100:2009-06.
• The Geberit Pluvia heater conforms to EN 60335-2-83:2002 + A1:2008. It must be installed
professionally.
• Dispose of the Geberit Pluvia heater if the mains connection cable is damaged.
• The country-specific regulations must also be observed.
63050398525748107 © 08-2022
965.846.00.0(07)
1)
).
EN
5