Publicidad
Idiomas disponibles
Idiomas disponibles
Names and Functions of
Components
1
2 3
1 Lens surface
2 Focus ring
Rotate to focus when taking pictures with manual
focus.
3 Zoom ring
Rotate the zoom ring when you wish to take large
(tele) or wide (wide angle) pictures. (35 mm film
camera equivalent: 24 mm to 70 mm)
8
VQT4G28
4
5 6
7
4 [O.I.S.] switch
When the lens is attached to the camera the
stabilizer function is set to activate if the [O.I.S.]
switch is set to [ON].
≥ We recommend setting the [O.I.S.] switch to [OFF]
when using a tripod.
≥ The stabilizer function may not be effective in the
following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– When using the digital zoom.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take
pictures indoors or in dark places.
5 Contact points
6 Lens fitting mark
7 Lens mount rubber
Note
≥ When flash recording with a close subject, the
light of the flash will be blocked by the lens and
part of the picture may be dark. Check the
distance from the subject when recording.
≥ When recording on the wide-angle side and using
the flash, the periphery of the screen may darken. In
such cases, we recommend using the external flash.
≥ If you zoom after focusing, focusing errors may occur.
After zooming, please perform the focusing again.
Publicidad
