Publicidad
Idiomas disponibles
Idiomas disponibles
AVAILABLE
ACCESSORIES
Visit your Sears Hardware Department or see the Sears
Power and Hand Tool Catalog for the following
accessories.
ITEM
Replacement Knives
Replacement Push Blocks
Dust Collection Reducer Kit
4" to 21/2 ''
STOCK NUMBER
See catalog or store
See catalog or store
OR90376
Sears may recommend other accessories not listed in
this manual.
See your nearest Sears Hardware Department or Sears
Power and Hand Tool Catalog for other accessories.
Do not use any accessory unless you have completely
read the Owner's Manual for that accessory.
r!q, viV_,1 :_1 _II _[€'ll
Use only accessories recommended for this Jointer/
Planer. Using other accessories may cause serious
injury and cause damage to the Jointer/Planer.
This Jointer/Planer
will require some assembly.
Your new Jointer/Planer
and stand are shipped in one carton.
Carefully unpack the Jointer/Planer.
Remove all of the parts from the shipping box and lay them on a clean work
surface. Compare the items to (Figure 3 and 4). Verify that all items are accounted for before discarding the
shipping box. 8mm, 10mm, 14mm, and 17mm open end wrenches and a phillips screwdriver are required for
assembly. Hex wrenches 2.5mm, 3mm, 4mm, and 8mm are provided for assembly.
Figure 3
10
5
UNPACKING
1. Stand Leg (qty. 4)
2. Push Block Holder
3. Dust Chute
4. Stand Bottom Plate
5. Stand Top Plate
6. Right Side Panel
7. Left Side Panel
8. Rear Panel
9. Front Panel
10. Cutterhead Pulley Guard
6
Publicidad
