Publicidad
Idiomas disponibles
Idiomas disponibles
,
~
CONNECTING
OPTIONAL
LISTENING TO EXTERNAL
1
EQUIPMENT
SOURCES
!
~
I "Fr
I
8"'':AtT0uT
1
POWER
ml
'""–
— SUPtH
WOOFER
~
To play equipment
connected
to the VIDEO/AUX
jacks or MD
Refer to the operating
instructions
of the connected
equipment
jacks, proceed
as follows.
for details.
The connecting
cords are not supplied.
Obtain
the necessary
1 Press the VIDEO/AUX
or MD button.
connecting
cords.
When a equipment connected to the VIDEO/AUX jacks is
Consult
your local Aiwa dealer for optional
equipment.
played:
press the VIDEO/AUX
button.
VIDEO/AUX,
MD JACKS
When a equipment connected to the MD jacks is played:
press the MD button.
This unit can input analog
sound signals
through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
2' Play the connected
equipment.
(turntables,
LD players,
MD players,
VCRS, TV, etc.).
Connect
the red plug to the R jack, and the white plug to the L
To change a source name in the display
I
When
the VIDEO/AUX
button
is pressed,
VIDEO
is displayed
jack.
initially.
It can'be
changed
to'AUX
or TV.
When connecting
a turntable
With the power on, press the POWER
button while pressing
the
Use an Aiwa turntable
equipped
with a built-in equalizer
amplifier.
VIDEO/AUX
button.
Repeat the procedure
to select one of the names.
LINE OUT JACKS
This unit can output analog
sound signal through
these jacks.
To adjust the sound level of the external source
Use a cable with RCA phono plugs to connect
audio equipment
When the sound
level of the external
source
is much higher
or
with LINE IN (analog
input) jacks.
much
lower
than
that of other
function
sources,
adjust
it as
'
follows.
~
m
1
Press the VIDEO/AUX
or MD button and play the equipment.
Do not connect
an equipment
to the LINE OUT terminals
and
2
Presss the++
or
> button so that the sound level becomes
VI DEO/AUX
terminals
simultaneously.
Otherwise,
noise
is
the same as that of other function
sources.
generated
and malfunction
occurs.
CD DIGITAL OUT (OPTICAL) JACK
m
During
recording,
the sound level can not be adjusted.
.
This unit can output
CD digital sound signals
through
this jack.
Use an optical
cable to connect
digital
audio equipment
(digital
amplifier,
DAT deck, MD recorder,
etc.).
Remove
the dust cap @ from the CD DIGITAL OUT (OPTICAL)
.,
jack. Then,
connect
an optical
cable
plug to the CD DIGITAL
OUT (OPTICAL)
jack-
—
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
\
Attach the supplied
dust cap.
SUPER WOOFER 4 JACK
Connect
an optional
powered
sub woofer with a built-in-amplifier
to the jack.
23
ENGLISH
,.
.
Publicidad
