SAFETY WARNINGS FOR BATTERY PACK
a) Do not dismantle, open or shred cells.
b) Do not short-circuit charging terminal. Do not store
power tool haphazardly in a box or drawer where
charging terminal may short-circuit each other or be
short-circuited by conductive materials. When battery
pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection
from one charging terminal to another.Shorting the
battery terminals together may cause burns or a fire.
c) Do not expose power tool to heat or fire. Avoid
storage in direct sunlight.
d) Do not subject power tool to mechanical shock.
e) In the event of battery leaking, do not allow the liquid
to come into contact with the skin or eyes. If contact
has been made, wash the affected area with copious
amounts of water and seek medical advice.
f) Keep power tool clean and dry.
g) Wipe the charging terminals with a clean dry cloth if
they become dirty.
h) Battery pack needs to be charged before use. Always
refer to this instruction and use the correct charging
procedure.
i) Do not maintain power tool on charge when not in use.
j) After extended periods of storage, it may be
necessary to charge and discharge the power tool
several times to obtain maximum performance.
k) Recharge only with the charger specified by Worx.
Do not use any charger other than that specifically
provided for use with the equipment.
l) Do not use any battery pack which is not designed for
use with the equipment.
m) Keep battery pack out of the reach of children.
n) Retain the original product literature for future
reference.
o) Remove the battery from the equipment when not in
use.
p) Dispose of properly.
q) Do not mix cells of different manufacture, capacity,
size or type within a device.
r) Keep the battery away from microwaves and high
pressure.
s) Warning! Do not use non-rechargeable batteries.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
13