Publicidad
Idiomas disponibles
Idiomas disponibles
the impact driver may automatically cut off power during
operation:
• Overloaded: The tool is operated in a manner that causes
it to draw an abnormally high current. In this situation,
release the Trigger Switch on the tool and stop the
application that caused the tool to become overloaded.
Then pull the Trigger Switch again to restart.
• Overheated: Under the condition above, if the tool does
not start, the Tool and Battery are too hot. In this situation,
let the Tool and Battery cool before pulling the Trigger
Switch again.
• Low battery voltage: The remaining Battery capacity
is too low and the tool will not operate. In this situation,
remove and recharge the Battery.
WARNING: To turn on the light, press
the On/Off trigger and make sure the
18
Forward/Reverse Rotation Control is on right/left position.
6.TROUBLE SHOOTING
REASONS FOR DIFFERENT BATTERY PACK WORKING
TIMES
Charging time problems, as above, and having not used
a battery pack for a prolonged time will reduce the
battery pack working time. This can be corrected after
several charge and discharge operations by charging &
working with your drill. Heavy working conditions such
as large screws into hard wood will use up the battery
pack energy faster than lighter working conditions. Do
not re-charge your battery pack below 0
40
C as this will affect performance.
o
7.MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or
maintenance. Never use water or chemical cleaners
to clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls
free of dust.
8.FOR BATTERY TOOLS
The ambient temperature range for tool and battery use
and storage is 0
The recommended ambient temperature range for the
charging system during charging is 0
DETAILS REGARDING SAFE DISPOSAL OF USED
BATTERIES：
At the end of the life of the appliance, remove the battery
pack safely before disposing of the appliance. Do not throw
batteries away or throw them in the normal trash can. Also
do not dispose of the battery with the machine. Remove the
used battery pack from the appliance and dispose of it at the
nearest or convenient dedicated recycling facility. If in doubt,
C and above
o
consult your local environmental protection department.
C -45
C.
o
o
C ~40
o
C.
o
Publicidad
