Publicidad
INSERTION OF A COMB GUIDE:
- Hold the guide comb by the two sides, insert the head into the
guides (Fig. 1), and pressing on the comb release button (Fig.2),
slide downward until it is coupled.
- Use the comb size selector to adjust the height of the cut.
- To remove the guide comb (5), press and hold the comb release
button (6) and pull upward.
U BLADE (2)
- Suitable for trimming beard, moustache and sideburns.
- It can be used with or without guide comb, depending on the desi-
red cutting height.
USE:
- The appliance can be used directly connected to the mains or by
using his batteries.
- If you want to use the device connected to the mains, extend the
cable completely before plugging it in.
- Connect the appliance to the mains.
- Select the desired cutting height using the comb height selector.
Press it and adjust the height according to the desired cutting
length.
COMB TO TRIM BEARD:
- Use the guide comb (5) depending on the desired cutting length.
- Cut the hair moving the appliance in the opposite direction of the
natural growth of the hair.
- Always ensure that teeth of the comb guide are pointing in the
direction in which the appliance is moving.
- Avoid clogging the comb with hair. Remove and clean it from time
to time.
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
- Turn the appliance off using the on/off button.
- Unplug the appliance from the mains.
- Clean the appliance.
- To keep the trimmer working properly, oil it with light machine oil
after each use.
CLEANING:
- Disconnect the battery charger from the mains and allow it to cool
before undertaking any cleaning task.
Publicidad
