Suzuki 990D0-11JME-010 Instrucciones De Montaje página 2

Description: Mirror Extension
Fit: DL650AL2- / DL650XAL5- / DL1000AL4- / DL1000XAL8-
No. Description
Part List
1. Mirror Extension
2. M10 x 1,25 x 45 DIN 912 Hexagon Socket Screw
3. 19 / 10,5 / 21 Spacer, black
4. Plastic Cap, black
5. Mounting Instructions (without picture)
Description
Tools
A Ratchet with short Extension
Required
B Hexagon Socket 8 mm
C Wrench 17 mm (2x)
D Torque Wrench
Please read this manual and follow its instructions carefully. To emphasize
IMPORTANT
special information, the symbol
NOTICE and NOTE have special meanings. These special meanings apply
except when laws or regulations require that the signal words be used with a
different meaning. Pay special attention to the messages highlighted by these
signal words.
Indicates a potential hazard that could result in death or serious injury.
Indicates a potential hazard that could result in minor or moderate injury.
Indicates a potential hazard that could result in vehicle or equipment damage.
NOTE: indicates special information to make maintenance easier or instruc-
tions clearer.
2
MOUNTING INSTRUCTIONS
Item: 990D0-11JME-010
Assembly Time: 10 Min.
Qty.
1
2
2
2
2
2
1
3
4
A
B
C
D
and the words WARNING, CAUTION,
!
WARNING
!
CAUTION
!
NOTICE
1.- Park the vehicle on a firm and even surface.
Preparation
2.- Turn off the vehicle and remove the ignition key. If necessary, allow the
engine/exhaust to cool prior to installation.
3.- Read these intructions carefully before assembly and examine whether all
parts are enclosed in accordance with the parts list.
If you do not feel technical qualified to install this product on your own, please
consult with your nearest SUZUKI dealer.
Should the Original Suzuki Accessory Screen be mounted in combination
with the Mirror Extension, please ensure that the parts are not in contact with
each other.
1.- Remove both mirrors from the vehicle.
Mounting
2.- Attach the mirror extensions (1) to the vehicle, as shown in the drawing.
Tighten the screws (2).
Pay attention to the recommended torque of screws (2) (M10): 30 Nm.
3.- Attach the mirrors to the mirror extensions (1). After the mirrors are aligned,
counter the threads with the original nuts (!).
Due to mounted SUZUKI Genuine Accessories the service and maintanance
Inspection
flat rate might be affected. Dismounting / Mounting of SUZUKI Genuine
Accessories is possibly necessary for service and maintenance.
The holder of the vehicle should always be in possession of the mounting
instructions.
Attachments can loosen from vibrations. Examine the screw tightness in
regular intervals in agreement with the service manual.
CAUTION
!
NOTICE
CAUTION
!
CAUTION
!
11/2016
SUZUKI GENUINE ACCESSORIES