Publicidad
Idiomas disponibles
Idiomas disponibles
3.
PRODUCT DESCRIPTION
EN
1.
LCD display
2.
Weighing platform
4.
INSTALLING THE BATTERY
Before first use, remove the plastic insulation strip from the battery compartment and discard it.
The battery is included inside.
Replace the battery when the low battery indication is displayed.
1.
On the underside of the device, loosen the battery compartment screw by turning it
counter-clockwise.
2.
Push the clip in the direction of the arrow to open the battery compartment cover.
3.
Carefully pry up the accessible side of the battery using your fingernail or a flat tool.
4.
Insert a new battery (1x CR2032) into the compartment with the positive (+) side facing
the cover.
5.
Close the battery compartment cover.
6.
Tighten the screw by turning it clockwise.
7.
Safely dispose of the old battery.
5.
OPERATION
5.1. SETTING UP THE SCALE
■
Select the desired unit of weight by pressing the Unit button on the underside of the
scale.
■
Place the scale on a solid, level and even floor surface.
5.2. CALIBRATING THE SCALE
Perform this calibration process only once, after placing or moving the scale on the floor:
1.
Tap the weighing platform once with your foot.
2.
Wait for the scale to turn on, display "0.0" and turn off. The scale is ready to use.
NOTE: The calibration process must be repeated one time if the scale has been moved.
Thereafter, use the scale as normal.
5.3. USING THE SCALE
1.
Step on the scale barefoot and stand still. Keep your feet slightly apart and your weight
evenly distributed on both legs.
2.
The scale will turn on and display your weight reading.
3.
Step off the scale. The display will reset to "0.0". The scale will automatically turn off
after approximately 6 seconds if there is no further weighing activity.
3.
Unit button
4.
Battery compartment
6
Publicidad
