Hilti Nuron CU 4-22 Manual De Instrucciones página 19

2.2 Battery use and care
▶ Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶ Use only batteries that are in perfect working order.
▶ Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ Avoid short circuiting the battery terminals. Check that the battery terminals and the terminals in the
power tool are free from foreign objects before inserting the battery in the tool.
▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
3 Description
3.1 Product overview
3.2 Intended use
The product described is a USB charging adapter. It is designed for charging mobiles, tablets, headphones
and other devices with USB-A , USB-C port or wireless charging function by using Hilti Li-ion batteries of
the B 22 series.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in this table for this product.
• For these batteries, use only Hilti chargers of the type series stated in this table.
*2401892*
1
2401892
ON⁄OFF button
@
USB-C port
;
USB-A port
=
Battery
%
Wireless charging pad
&
LED ON/OFF button
(
LED light
)
Battery release button
+
Battery status indicator
§
English 17