Symbols used in this manual
WARNING!
Denotes impending danger. Non-observance
of this warning may result in death or
extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation. Non-
observance of this warning may result in
slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
L/min
Air flow rate
To reduce the risk of injury, read
the operating instructions!
Disposal information for the old
machine (see page 16)!
For your safety
WARNING!
Before using the power tool, please read the
follow:
This appliance can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
Children shall not play with the appliance.
Keep the appliance and its cord out of
reach of children.
these operating instructions,
the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool may
be a danger to life and limb of the user or a third
12
party, or the power tool or other property may be
damaged.
The digital heat gun may be used only
as intended,
in perfect working order.
Faults which impair safety must be repaired
immediately.
A fire may result if the appliance is not used
with care, therefore:
– be careful when using the appliance
in places where there are combustible
materials. Do not apply to the same place for
a long time.
– do not use in presence of an explosive
atmosphere.
– heat may be conducted to combustible
materials which are out of sight.
– place on its stand after use and follow to cool
before storage.
Intended use
The digital heat gun is intended
– for commercial use in industry and trade,
– for melting down plastic or glue,removing
stickers, shrinking PVC wrapping or insulation
tubes and other similar applications.
Safety instructions for heat gun
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
■ Take particular care when working in the
vicinity offlammable materials. The hot
airflow or hot nozzle may ignite dust or
gases.
■ Do not work with the heat gun in
potentially explosive areas.
■ Do not aim the hot airflow at the same
area for pro-longed periods. Working with
plastic, paint, varnish or similar materials
may produce easily flammable gases.
■ be aware that heat may be conducted
to combustible materials that are out of
sight.
■ DO NOT use this tool to remove paint
containing lead. The peelings, residue and
HG 650 2000