Bimar S110TT Folleto De Instrucciones página 12

Fax +32 030 9904733

Follow these steps when using the radiator:
1) Insert the plug in the power socket.
2) Turn the 0/I switch to position I.
3) Press the on/off switch to "on" position.
4) Press the Mode key to set the following functions:
- room temperature: "
– key to raise or lower the value. After 10 minutes, the display returns to indicating the surrounding
temperature.
- functioning time
functioning time.
- turbo function: " " blinks on the display and the + key can be used to activate the heating fan or
the – key to exclude the fan. The turbo directs the heat to the front of the radiator.
5) Press the on/off to "on": the "
used. For maximum power, press the power key so the "
Temperature and timing can be adjusted while the radiator is in function.
6) To switch off the appliance, press the on-off key to the off position, the 0/I to position 0, then
remove the plug from the power socket.
Never leave the appliance connected to the socket if it is not in use, especially for long periods.
CLEANING AND MAINTENANCE
Attention: before cleaning, switch off the appliance, unplug and wait until it has cooled down
completely.
• To clean the casing use a soft damp cloth; do not use abrasive products.
• When the radiator is not in use it must be covered and stored in a dry place. We recommend
using the original packing to preserve it from dust and humidity.
• When you decide that the appliance is no longer required, we recommend making it
inoperative by cutting the power cord (after ensuring that the cable plug has been
disconnected from the socket) and ensure that any dangerous parts are rendered harmless if
children are allowed to play with them.
• This radiator is filled with a precise quantity of special oil. Repairs requiring the radiator to
be opened must be made only by the Manufacturer or by its Assistance Service. Should there
be any oil leak, the Manufacturer or its Assistance Service must be contacted immediately.
• When scrapping the appliance, respect legislation on the disposal of oil.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2011/65/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to
a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the constituent materials to
be recovered to obtain significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a crossed-out wheeled
dustbin.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
" flashes on the display and , to set the required temperature, press the + or
: "---" blinks and the + or – keys can be used to increase or reduce the
" symbol on the display to indicate that minimum power is being
12
Assembly page 12/32
" symbol on the display.
32
/