Publicidad
Idiomas disponibles
Idiomas disponibles
The appliance has a safety device, which
protects the appliance from overheating.
When the appliance switches itself on and
off repeatedly, for reasons other than the
thermostat control, check to ensure that there
are no obstacles that impede correct air entry
or expulsion.
If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
CLEANING THE FILTER (FIG.1):
The air inlet filter should be cleaned
periodically for proper operation of the device.
To do this, turn the filter counterclockwise.
Clean the filter and remove any dirt or hair.
Put the filter back in its place and turn
clockwise.
Publicidad
