Publicidad
Idiomas disponibles
Idiomas disponibles
English
Description
This converter by Delock enables the connection of an M.2 NVMe or SATA SSD,
in 2280, 2260, 2242 and 2230 format, or a 2.5" or 3.5" SATA HDD or SSD through
the USB interface.
Specification
• Connectors:
1 x USB 10 Gbps USB Type-C™ female
1 x M.2 key M slot
1 x SATA 6 Gb/s 22 pin receptacle
1 x DC jack
• Chipset: Realtek RTL9210B
• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key
B+M based on SATA or PCIe (NVMe)
• Maximum height of the components on the module: 1.5 mm, application of
double-sided assembled modules supported
• For 2.5" and 3.5" SATA HDD / SSD
• Supports NVM Express (NVMe)
• Supports S.M.A.R.T.
• Supports TRIM
• Supports Native Command Queuing (NCQ)
• Data transfer rate up to 10 Gbps
• Supports UASP
• 2 x LED indicator for power and access
• Bootable
• Function key:
1 x On / Off switch
1 x switch for M.2 or 2.5" / 3.5" drive
• Dimensions (LxWxH): ca. 107 x 35 x 24 mm
• Hot Plug, Plug & Play
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.5 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
-2-
Publicidad
