DeLOCK 64253 Manual Del Usuario página 3

English
System requirements
• Android 9.0 or above
• Chrome OS
• Linux Kernel 5.15 or above
• Mac OS 12.4 or above
• Windows 10/10-64/11
• iPad Air (4th Generation) or above
• iPad Pro (3rd Generation) or above
• Surface Pro 7
• PC or laptop with a free USB Type-A port or
• Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 or
Thunderbolt™ 4 port
Package content
• USB Type-C™ converter
• Cable USB-C™ male to USB-C™ male, length ca. 80 cm
• Cable USB-C™ male to USB Type-A male, length ca. 80 cm
• 3 x rubber nipple
• External power supply 12.0 V / 2.0 A
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Pay attention that the HDD can be hot when it is connected to the device.
Installation
SATA HDD / SSD
1.
Connect your SATA 22 pin device to the converter.
2.
Connect the USB cable to the converter.
3. Now connect the USB cable with an available USB port of your computer.
4. Set the switch to the required on the converter.
5. Switch on the converter.
6. The power lights up blue.
7.
Switch on your computer.
8.
The external drive will be recognized and you can start using the device
immediately.
9. The LED lights up white permanently and flashes when there is activity.
-3-